0-523-56 Durite 24V Illuminated Fuel Gauge 52mm Diameter

£67.32 Excl. VAT

RRP ~~£74.80~~ Excl. VAT

(£80.78 Inc. VAT)

Initial Savings

£7.48

Earn 67 Loyalty Points

Available

Model

0-523-56

Bar Code

5056119115727

Part Number

0-523-56

Brand

Durite

Colour

Black

Voltage

24V DC

Material

Plastic/Copper/Brass/Steel

Intrastat HS Code 9026102900

Ship Weight

450 g

Durite 0-523-56, 24 Volts DC illuminated automotive fuel gauge.

Voltage: 24VDC
90° sweep.
Supplied with adjustable sender.
Matt black bezel and white figures.
Requires 52mm dashboard hole.
Bridge type fitting.

Associated Product

¹⁄₈″ NPTF replacement sender available separate, part number: 0-523-96.

Fitting Instructions for Translation Purposes

Ensure that the clock voltage matches the vehicle or system voltage (including illumination).
Choose a suitable location for the fuel gauge with adequate access to the rear of the meter for connections and fixings.
Switch off the ignition and remove the key. Disconnect the battery (earth terminal first). Note: Before disconnecting the battery, make sure all system start-up codes are known, i.e. coded radios, etc.
Cut a 53 mm diameter hole at the chosen location for the fuel gauge. Push the meter into the hole and fit the “U” bracket over the mounting studs at the rear of the gauge. Fit washer(s) and nut to each stud. Align gauge and tighten nuts.
See reverse of this instruction leaflet for installation of the fuel tank sender unit.
Connect the terminal marked “+” to a suitable ignition-controlled fused supply or positive feed and connect the terminal marked “-” to earth or negative feed. Connect the terminal marked “S” to the fuel tank sender terminal stud.
Connect the bulb wiring, orange (12v 0-523-06) wire or white (24v 0-523-56) wire to the vehicle panel lamp supply (after the fuse), and black wire to earth.
Check all connections are correct and secure. Reconnect battery (earth terminal last). Switch on the ignition and check the fuel gauge to indicate the fuel level. Switch on the panel lamps and check that the fuel gauge is illuminated.

Warning! Flammable liquids.

Do Not’s

Allow any naked lights or anything hot close to the vehicle.
Connect the fuel gauge to any other sender unit.

Do’s

Ensure there are no leaks from the tank or sender unit.
Always work in a well-ventilated area.

Delivery

UK Mainland Postage

Delivery Options Our Free UK Mainland Postage and Packaging Service offers unbeatable value for money. The free UK Standard shipping is automatically applied to your shopping cart page with no additional cost when you reach the £50.00 minimum order value.

We use Royal Mail Standard or Recorded Delivery for light, low-value orders and we use FedEx, UPS, Parcel Force, and other major courier services for larger and more valuable consignments.

International Consignments

Our international customers will need to provide the exact Card Holder Address (Invoicee) as the first address for payment processing. Please note that PO Box addresses are not acceptable as delivery addresses by some couriers. All export orders must be placed and paid for online. Proforma Bank Transfer IBAN and SWIFT payment methods are available to create online.

Also Bought