0-523-67 Durite 24V Illuminated Oil Pressure Gauge 52mm Diameter

£55.69 Excl. VAT

RRP ~~£61.88~~ Excl. VAT

(£66.83 Inc. VAT)

Initial Savings

£6.19

Earn 55 Loyalty Points

Available

Model

0-523-67

Bar Code

5056119140118

Part Number

0-523-67

Brand

Durite

Colour

Black

Voltage

24V DC

Material

Plastic/Copper/Brass/Steel

Intrastat HS Code 9026204000

Ship Weight

270 g

Durite 0-523-67, 24 Volts DC illuminated oil pressure gauge.

Voltage: 24VDC.
90° sweep.
Supplied with 1/8" NPTF sender.
Matt black bezel and white figures.
Requires 52mm dashboard hole.
Bridge type fitting.

Associated Product

0-523-89 replacement sender.

Fitting Instructions for Translation Purposes

Ensure that the gauge voltage matches the vehicle or system voltage (including illumination).
Switch off the ignition and remove the key. Disconnect the battery (earth terminal first). Note: Before disconnecting the battery, ensure all system start-up codes are known, i.e.coded radios, etc.
Choose a suitable location for the gauge with adequate access to the rear of the gauge for connections and fixings.
Cut a 53 mm diameter hole at the chosen location for the gauge. Push the gauge into the hole and fit the "U" bracket over the mounting studs at the rear of the gauge. Fit washer(s) and nut to each stud. Align gauge and tighten nuts.
Fit the sender unit to a suitable point in the system being monitored. Ensure that the sender unit body connects to the earth.
Connect the terminal marked "+" to a suitable ignition-controlled fused supply or positive feed and connect the terminal marked "-" to earth or negative feed Connect the terminal marked "S" to the stud terminal on the sender unit.
Connect the bulb wiring Orange wire to the vehicle panel lamp supply (after the fuse) and Black wire to earth.
Check all connections are correct and secure. Reconnect battery (earth terminal last). Start the engine and check that the gauge registers. Switch on panel lamps and check that the gauge illuminates.

Delivery

UK Mainland Postage

Delivery Options Our Free UK Mainland Postage and Packaging Service offers unbeatable value for money. The free UK Standard shipping is automatically applied to your shopping cart page with no additional cost when you reach the £50.00 minimum order value.

We use Royal Mail Standard or Recorded Delivery for light, low-value orders and we use FedEx, UPS, Parcel Force, and other major courier services for larger and more valuable consignments.

International Consignments

Our international customers will need to provide the exact Card Holder Address (Invoicee) as the first address for payment processing. Please note that PO Box addresses are not acceptable as delivery addresses by some couriers. All export orders must be placed and paid for online. Proforma Bank Transfer IBAN and SWIFT payment methods are available to create online.

Also Bought