Albright Double-pole Single-throw Solenoid Contactors
Albright International 80A SW68, SW688, and 100A SW82, SW822 switch contactors from Arc Components Limited. The double-pole, single-throw (DPST) switch solenoids have silver alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The units can be used for switching small to large traction motors (depending on the version), hydraulic power packs and electric motors. All versions are available for Scheduled Maintenance or Production Run lead-time ordering.
Albright International - Solenoid Coil Terminology Guide
 |
SW822-116L paired 24Vdc solenoid for motor-reversing, intermittent. 2 x 24 Volts DC DPST contactors on a bracket.
Excl VAT
Despatch: 8 to 10 Weeks
 .jpg) .jpg) .jpg) |
SW822-48P paired 24Vdc solenoid for motor-reversing, intermittent. 2 x 24 Volts DC DPST IP66 protected contactors on a bracket.
Excl VAT
 .jpg) .jpg) .jpg) |
SW822-4 paired 24Vdc solenoid for motor-reversing, continuous. 2 x 24 Volts DC double-pole, single-throw contactors on a bracket.
Excl VAT
 .jpg) .jpg) .jpg) |
SW822-54P paired 24Vdc solenoid for motor-reversing, continuous. 2 x 24 Volts DC DPST IP66 protected contactors on a bracket.
Excl VAT
 .jpg) .jpg) .jpg) |
SW822-5 paired 36Vdc solenoid for motor-reversing, intermittent. 2 x 36 Volts DC double-pole, single-throw contactors on a bracket.
Excl VAT
Despatch: 8 to 10 Weeks
 .jpg) .jpg) .jpg) |
SW822-65P paired 36Vdc solenoid for motor-reversing, intermittent. 2 x 36 Volts DC DPST IP66 protected contactors on a bracket.
Excl VAT
Despatch: 8 to 10 Weeks
 .jpg) .jpg) .jpg) |
SW822-6 paired 36Vdc solenoid for motor-reversing, continuous. 2 x 36 Volts DC double-pole, single-throw contactors on a bracket.
Excl VAT
 .jpg) .jpg) .jpg) |
SW822-42P paired 36Vdc solenoid for motor-reversing, continuous. 2 x 36 Volts DC DPST IP66 protected contactors on a bracket.
Excl VAT
Despatch: 8 to 10 Weeks
    |
SW822-37 paired 40Vdc solenoid for motor-reversing, continuous. 2 x 40 Volts DC double-pole, single-throw contactors on a bracket.
Excl VAT
Despatch: 8 to 10 Weeks
 .jpg) .jpg) .jpg) |
SW822-7 paired 48Vdc solenoid for motor-reversing, intermittent. 2 x 48 Volts DC double-pole, single-throw contactors on a bracket.
Excl VAT
Despatch: 8 to 10 Weeks
 .jpg) .jpg) .jpg) |
SW822-94P paired 48Vdc solenoid for motor-reversing, intermittent. 2 x 48 Volts DC DPST IP66 protected contactors on a bracket.
Excl VAT
Despatch: 8 to 10 Weeks
 .jpg) .jpg) .jpg) |
SW822-8 paired 48Vdc solenoid for motor-reversing, continuous. 2 x 48 Volts DC double-pole, single-throw contactors on a bracket.
Excl VAT
Despatch: 8 to 10 Weeks
 .jpg) .jpg) .jpg) |
SW822-52P paired 48Vdc solenoid for motor-reversing, continuous. 2 x 48 Volts DC DPST IP66 protected contactors on a bracket.
Excl VAT
Despatch: 8 to 10 Weeks
 .jpg) .jpg) .jpg) |
SW822-12 paired 72Vdc solenoid for motor-reversing, continuous. 2 x 72 Volts DC double-pole, single-throw contactors on a bracket.
Excl VAT
Despatch: 8 to 10 Weeks
 .jpg) .jpg) .jpg) |
SW822-13 paired 80Vdc solenoid for motor-reversing, continuous. 2 x 80 Volts DC double-pole, single-throw contactors on a bracket.
Excl VAT
Despatch: 8 to 10 Weeks
 |
SW822-6 paired 36Vdc solenoid for motor-reversing, continuous. 2 x 36 Volts DC double-pole, single-throw contactors on a bracket.
Excl VAT
Despatch: 8 to 10 Weeks
 .jpg) |
Albright SW132AE-38 240 Volts AC double-pole, single-throw Normally Closed solenoid. DPST contactor for mains failure changeover duty.
Excl VAT
Despatch: 8 to 10 Weeks
 |
Albright SW82 contact kit, consists: 2 x moving contact, 4 x contact studs with nuts, washers and holders, with Silver alloy contact tips.
Excl VAT
 .jpg) .jpg) |
SW82 large tip contact kit, consists of two moving contacts, four contact studs with nuts, washers and holder, Silver alloy tips.
Excl VAT
 .jpg) |
Albright SW120 & SW122 repair kit, consists: 1 x moving contact assembly, 4 x contact studs with nuts and washers, enough to service 1 coil (SW120).
Excl VAT
 |
Albright SW190 & SW192 repair kit, consists: 1 x moving contact assembly, 4 x contact studs with nuts and washers, enough to service 1 coil (SW190).
Excl VAT
 .jpg) |
Albright SW80 and SW82 single-acting solenoid bracket. Designed for mounting SW80 and SW82 solenoids to panels or bulkheads.
Excl VAT