SW822-116L Albright Paired Double-Pole Single-Throw Solenoid 24V Intermittent

 Albright's SW822-116L strapped pair, 24 Volts DC 100 Amps DPST Normally Open switch contactor, intermittent. The unit has large tips and dust shields on the inward facing apertures.

• The SW822 type of contactors has been designed for direct current loads, including motor reversing functions as used on electric vehicles and industrial trucks.
• Developed for both interrupted and uninterrupted loads, the SW822 is suitable for switching Resistive, Capacitive and Inductive loads.
• The strapped pair SW822 features double pole double-breaking main contacts with Silver-alloy tips, which are weld resistant, hardwearing and have excellent conductivity.
• Dust shields are fitted on the inwards facing appertures.
• 1N4007 Diode suppression fitted, positive at the top.

Associated Products

• 2070-90A Service or repair contact kit (use 2 for this unit)
• 2070-41 Mounting bracket.

Dimensions

• Base plate to the top of brass studs (height): 91mm.
• Body length excluding mounting bracket: 86.4mm.
• Depth: 55mm including bracket.
• Main terminal studs: M8.

About Intermittent (Int.) SW822-116L Solenoids

 Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.

 The contactors are compact in size and are fully serviceable with a full range of spare parts available. The SW822 has M8 stud main terminals and 6.3mm spade coil connections. It can be mounted via the supplied mounting bracket. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.

Specifications