SW822-7 Albright Paired Double-pole Single-throw Solenoid 48V Intermittent

 Albright International SW822-7 strapped pair, 48 Volts DC 100A, DPST Normally Open switch contactor, intermittent.

• The SW822 contactors have been designed for direct current loads, including motor reversing functions used on electric vehicles and industrial trucks.
• Developed for both interrupted and uninterrupted loads, the SW822 is suitable for switching Resistive, Capacitive and Inductive loads.
• The strapped pair SW822 features double pole double-breaking main contacts with Silver-alloy tips, which are weld resistant, hardwearing and have excellent conductivity.
• Supplied with mounting bracket 2070-41

Associated Products

• 2070-90 Service or repair contact kit (use 2 for this unit)
• 2070-41 Mounting bracket.

Dimensions

• Base plate to the top of brass studs (height): 91mm.
• Body length excluding mounting bracket: 86.4mm.
• Depth: 55mm, including bracket.
• Main terminal studs: M8.

About Intermittent (Int.) SW822-7 Solenoids

 Intermittent contactors, by design, are predominantly used for hydraulic functions on vehicles; they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.

 The contactors are compact in size and are fully serviceable, with a full range of spare parts available. The SW822 has M8 stud main terminals and 6.3mm spade coil connections. It can be mounted via the supplied mounting bracket. Mounting can be horizontal or vertical. When vertical, the M8 contact studs should point upwards.

Specifications