0-870-30 Durite 12V-24V Intelligent Ultrasonic Blind Spot Detection System

 Durite intelligent ultrasonic blind spot detection system is designed for commercial vehicles with super fast speed detection and protected from steam-jet cleaning.

• Visual and audible warnings up to 1.5M with LED warning buzzer.
• Detection within 0.2 seconds.
• ECU is protected to IP69K.
• Sensor and connector protected to IP68.
• Shock and vibration resistant.
• Environment learning mode.
• Flush (0 degrees), 11 degrees and underslung mounting available.
• E Marked ECE R10.05

About the Blind Spot Detection System 0-870-30

 The Ultrasonic Detection System is strictly meant as a driver aid, and the driver is still responsible for SAFE and CORRECT driving.

• 1 x System ECU.
• 1 x System Buzzer/Display.
• 1 x 10m Buzzer/Display Cable.
• 4 x High Sensitivity Sensor.
• 4 x 4.5m Sensor Cable.
• 2 x 2.5m Sensor Cable.
• 1 x Handbook.
• 4 x 0 degree Angle Sleeve.
• 4 x 11 degrees Angle Sleeve.
• 4 x Underslung Bracket.
• 1 x Accessory Kits.

 The Ultrasonic Detection System is a modern supervisory system that uses ultrasonic technology to eliminate blind spots for commercial vehicle drivers. The functional principle is based on the ultrasonic echo-transit time method. Each of the sensors will emit a steady intermitting ultrasonic signal. The sensors operate as both transmitters and receivers, which will receive the beamed and reflected ultrasonic signals from possible obstacles.

 The Ultrasonic Detection System can be fitted to the FRONT, CORNER, SIDE and BACK of the vehicle. The FRONT, CORNER and SIDE system can be activated by low speed or turning indicator through an extra control module. The BACK system can be activated by engaging the reverse gear. When the system is activated, the sensors will constantly scan the surroundings of the vehicle. If there is any obstacle detected, the in-cabin buzzer or display will send progressive visual and audible warnings to the driver. The driver shall then pay extra attention to the hazard area and manoeuvre the vehicle accordingly. The system can also be added with optional external warning alarms or warning lights so other road users in close proximity will be effectively informed of possible danger, too.

 Compared to the traditional way of eliminating blind spots, i.e. checking mirrors for hazard areas, the Ultrasonic Detection System will constantly scan the surroundings of the vehicle and send the driver both visual and audible warnings. Therefore, the driver will have more time to look ahead and check the mirrors. In busy traffic, the surroundings can dramatically change in the blink of an eye, and the system will be a great aid for the driver. Additionally, external warning alarms and warning lights will inform other road users, such as cyclists and pedestrians, to proactively keep their distance from the vehicle and, therefore, avoid a collision.

 The systems come with an IP69K ECU box and IP68 sensors and connectors, so they are suitable for all types of commercial vehicles, such as HGVs, LGVs, vans and buses. The 12/24VDC dual voltage feature means that they can be connected to vehicles with either a 12V or 24V power supply.

• 1. The latest robust sensors can detect people or φ40mm poles at 2.2 meters
• 2. Buzzer with audible and visual distance warning and adjustable volume control.
• 3. The buzzer will be muted if there is no change in detection distance for 4 seconds (for side and corner).
• 4. System Self-Checking Function – The system will check all the sensors when switched on. There will be no beep if all sensors are fine; it will beep once for one faulty sensor, twice for two faulty sensors…The LED remains green throughout the self-checking process.
• 5. Environment Memorising Mode – The system will not send false alarms caused by vehicle ancillary equipment within the first 1 meter of the detection zone.
• 6. Detection within 0.2s.
• 7. Universal sensor mounting options (through hole or underslung bracket).
• 8. Common components throughout the Ultrasonic Detection System range.
• 9. Detection range adjustable by dip switch (see details for each system).

Specifications