0-870-05 Durite Commercial Vehicle Blind Spot Detection System

 Durite intelligent ultrasonic blind spot reversing system constantly scans the rear of the vehicle and sends the driver both visual and audible warning through the in-cab buzzer once objects are detected.

• The ultimate solution for eliminating blind spots.
• Commercial vehicle blind spot sensor kit.
• Superfast detection within 0.2 seconds.
• 4 Ultrasonic sensors.
• Visual and audible warnings up to 2.2m.
• Environment learning mode and System self-checking function.
• Protected to IP68.
• E Marked ECE R10.05

Features

1. The latest robust sensors can detect people or φ40mm poles at 2.2 meters.
2. Buzzer with audible and visual distance warning and adjustable volume control.
3. The buzzer will be mute if there is no change in detection distance for 4 seconds (for SIDE and CORNER).
4. System Self-Checking Function. The system will check all the sensors when switched on. There will be no beep if all sensors are fine; it will beep once for one faulty sensor, twice for two faulty sensors…The LED remains green throughout the self-checking process.
5. Environment Memorising Mode – The system will not send false alarms caused by vehicle ancillary equipment within the first 1 meter of the detection zone.
6. Detection within 0.2s.
7. Universal sensor mounting options (through-hole or underslung bracket).
8. Common components throughout the Ultrasonic Detection System range.
9. The detection range is adjustable by dipswitch (see details for each system).

General Information

 The Ultrasonic Detection System is strictly meant as a driver aid, and the driver is still responsible for SAFE and CORRECT driving.

What is an Ultrasonic Detection System?

• The Ultrasonic Detection System is a modern supervisory system that uses ultrasonic technology to eliminate blind spots for commercial vehicle drivers.
• The functional principle is based on the ultrasonic echo-transit time method.
• Each of the sensors will emit a steady intermitting ultrasonic signal.
• The sensors operate as both transmitters and receivers, which will receive the beamed and reflected ultrasonic signals from possible obstacles.

How does it work?

• The Ultrasonic Detection System can be fitted to the FRONT, CORNER, SIDE and BACK of the vehicle. The FRONT, CORNER and SIDE system can be activated by low speed or turning indicator through an extra control module.
• The BACK system can be activated by engaging the reverse gear.
• When the system is activated, the sensors will constantly scan the surroundings of the vehicle. If there is any obstacle detected, the in-cabin buzzer or display will send progressive visual and audible warnings to the driver. The driver shall then pay extra attention to the hazard area and manoeuvre the vehicle accordingly.
• The system can also be added with optional external warning alarms or warning lights so other road users in close proximity will be effectively informed of possible danger, too.

Why is it better?

• Compared to the traditional way of eliminating blind spots, i.e. checking mirrors for hazard areas, the Ultrasonic Detection System will constantly scan the surroundings of the vehicle and send the driver both visual and audible warnings. Therefore, the driver will have more time to look ahead and check the mirrors.
• In busy traffic, the surroundings can dramatically change in the blink of an eye, and the system will be a great aid for the driver. Additionally, external warning alarms and warning lights will inform other road users, such as cyclists and pedestrians, to proactively keep their distance from the vehicle and, therefore, avoid a collision.

What is it compatible with?

• The systems come with an IP69K ECU box and IP68 sensors and connectors, so they are suitable for all types of commercial vehicles, such as HGVs, LGVs, vans and buses.
• The 12/24VDC dual voltage feature means that they can be connected to vehicles with either a 12V or 24V power supply.

Specifications