0-525-43 Durite 12V-24V LED Illuminated Water Temperature Gauge

 Durite 0-525-43, marine type and style 12 or 24 Volts DC LED illuminated water temperature gauge. Supplied with 1/8 inch NPTF sender.

• Voltage: 12-24VDC.
• 90° sweep dial.
• Scale: 40°C to 120°C
• Replacement sender part number: 0-525-85.
• Plastic cased.
• LED illumination choice of White or Yellow
• Matt black bezel and white figures.
• Requires 52mm dashboard hole.
• Large screw collar type fitting.

Wiring

1. Black – to Common Ground (-)
2. Red – to Positive (+)
3. Green – to the sensor unit
4. White – for the White backlight (+)
5. Orange – for the Yellow backlight (+)

Fitting Instructions

1. Cut a 52mm (2 1/16 inch) diameter panel hole.
2. Save a minimum of 55mm (2 3/16 inches) of depth behind the panel to fit the gauge.
3. Remove the fastening ring.
4. Fit cables through the panel hole and insert the connector into the back of the gauge.
5. Insert the gauge through the panel from the front, fit and tighten the fastening ring from the rear, checking the gauge's position before tightening.
6. Connect cables by following the instructions.

Specifications