SW88-118 Albright 24VDC Double-acting Reversing Solenoid - Intermittent

 Albright International SW88-118 24VDC 100 Amps double-acting strapped pair solenoid contactor with flying leads, intermittent.

• Double-acting strapped pair 24 Volts DC contactor for motor-reversing.
• The SW88 series of contactors has been designed for direct current loads, particularly motors used on small electric vehicles such as Light Industrial Trucks, Powered Invalid Cars, etc.
• The contactors are compact and fully serviceable, with various spare parts available.
• Repair contact kit part number: 2070-151.
• Auxiliary switch kit part number: 2070-124 (1 kit does 1 x coil).
• Enclosed top cover fitted.
• No bracket fitted.
• no steel nuts or groove washers.
• Flying lead connections.

About The Intermittent SW88-118 Reversing Contactors

 Intermittent contactors, by design, are predominantly used for hydraulic functions on vehicles; they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.

 The SW88 is a configuration of two SW84-type contactors on a common bracket for motor reversing. The SW88 features single pole double-breaking main contacts with Silver-alloy tips, which are weld resistant, hardwearing and have excellent conductivity.

 The SW88 main contact circuit, designed for motor reversing, is such that it has a built-in failsafe so that if both coils are energised simultaneously, the contact arrangement is open circuits.

 The SW88 has M8 stud main terminals and flying lead coil connections. Mounted using the mag-frame tapped M4 holes, mounting of the solenoids can be horizontal or vertical. When vertical, the M8 contact studs should point upwards.

Specifications