SW88-117 Albright Double-acting Reversing Solenoid 12V Intermittent

 Albright International SW88-117 12VDC 100 Amps double-acting strapped pair solenoid contactor with flying leads, intermittent.

• Double-acting strapped pair 12 Volts DC contactor for motor-reversing.
• The SW88 series of contactors has been designed for direct current loads, particularly motors used on small electric vehicles such as Light Industrial Trucks, Powered Invalid Cars, etc.
• The contactors are compact and fully serviceable, with various spare parts available.
• Repair contact kit part number: 2070-151.
• Auxiliary switch kit part number: 2070-124 (1 kit does 1 x coil).
• Enclosed top cover fitted.
• No bracket fitted.
• no steel nuts or groove washers.
• Flying lead connections.

About The Intermittent SW88-117 Reversing Contactors

 Intermittent contactors, by design, are predominantly used for hydraulic functions on vehicles; they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.

 The SW88 is a configuration of two SW84-type contactors on a common bracket for motor reversing. The SW88 features single pole double-breaking main contacts with Silver-alloy tips, which are weld resistant, hardwearing and have excellent conductivity.

 The SW88 main contact circuit, designed for motor reversing, is such that it has a built-in failsafe so that if both coils are energised simultaneously, the contact arrangement is open circuits.

 The SW88 has M8 stud main terminals and flying lead coil connections. Mounted mag-frame M4 tapped holes, mounting of the solenoids can be horizontal or vertical. When vertical, the M8 contact studs should point upwards.

Specifications