SW182-148 Albright Double-acting Motor-reversing Solenoid 24V - Prolonged

 SW182-148 double-acting strapped pair solenoid contactor 24V prolonged (PO) use.

• Double-acting strapped pair 24-volt dc contactor for motor reversing.
• The SW182 series of contactors has been designed for direct current loads, particularly motors as used on small electric vehicles such as industrial trucks, airport tractors, etc.
• The contactors are compact in size and are fully serviceable, with a range of spare parts available.
• Repair contact kit part number: 2180-44.
• Auxiliary switch kit part number: 2180-796 (1 kit does 1 x coil).
• Hardware kit fitted with straight link.

Dimensions

• Height including terminals and coil base cap: 121.5mm.
• Coil width including bars and bracket: 124.5mm.
• Cap width: 2 x 40mm.
• Total depth including bracket: 66mm.

About The SW182-148 Reversing Contactors

 Prolonged (PO) use, up to 90% duty cycle and up to 54 minutes of continuous energisation. The coil is more powerful than continuous and weaker than intermittent equivalent. The return spring is stronger than continuous but weaker than intermittent.

 The SW182 is a configuration of two 'Single Pole, Double Throw' type contactors on a common bracket for motor reversing. The SW182B features single pole double-breaking main contacts with Silver-alloy tips, which are weld resistant, hardwearing and have excellent conductivity.

 The SW182 main contact circuit, designed for motor reversing, is such that it has a built-in failsafe, so that if both coils are energised simultaneously the contact arrangement is open circuits.

 The SW182 has M8 stud main terminals and 6.3mm spade coil connections. Mounted using the supplied bracket, mounting of the solenoids can be horizontal or vertical, when vertical the M8 contact studs should point upwards.

Specifications