DC66-116P Albright 24V DC IP66 80A Motor-reversing Solenoid - Continuous

 Albright DC66-116P, 24 Volts DC 80 Amps motor-reversing switch solenoid with two diodes fitted, continuous.

• The DC66P range of compact 80A contactors follows the established design of the SW60 mono-block contactors, which are configured specifically for motor reversing.
• The DC66P is ideal for small battery-powered winches, vehicle-mounted cranes, small electric vehicles, etc.
• These contactors have closed contact housings and are sealed to inhibit the ingress of moisture or other contamination; they can, therefore, be used in environments that require protection to IP66.
• All the contactors are manufactured to a very high standard and employ the best quality materials: phenolic contact housings, Silver-alloy contacts and class H (180℃) winding wire for the coils.
• Repair kits are not available for this unit.
• Two Diodes fitted.

Dimensions

• Height, including terminals and coil base cap: 87.9mm.
• Width: 63.9mm.
• Depth (including bracket): 47.15mm.

Additional Information

 Continuous contactors, by design, are predominantly used for drive functions on vehicles; they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.

 The main contact circuit has a built-in fail-safe so that if both coils are energised simultaneously, the contact arrangement is an open circuit. The DC66P has double-breaking main contacts with Silver-alloy tips, which are weld-resistant, hardwearing and have excellent conductivity. The DC66P has M6 main stud terminals, and coil connections are by means of 6.3mm spades.

Specifications