12V Make and Break Relays
A 12 Volts DC make-and-break relay is a type of electronic switch used in power lines that run motors and lighting on automotive vehicles. Our range covers most styles of vehicle electric relays including versions with sealed resistors and diodes. They are commonly found in; cars, vans, HGVs, forklift trucks, marine watercraft, plant equipment and agricultural machinery running on 12Vdc. There are various build variations to the make and break relay, including double and suppressed versions with diodes and resistors.
The main function of a make-and-break relay is to establish or break an electrical connection in a power line. Typically, this relay typically has pins designated as 30 and 87, which are used for the power line connections. When the internal coil of the relay is energized, usually through coil pins 85 and 86, the switch is "made," allowing the flow of current through the power line.
In most cases, a make-and-break relay is designed as Normally Open (NO), meaning that the switch is open when the coil is not energized. When the coil is energized, the switch closes, creating a connection in the power line. This type of relay is commonly used to switch a positive line in automotive applications.
What is a Make and Break Relay?
DIN 72552 Contact Terminal Number Guide
 .jpg) .jpg) .jpg) |
Durite 12VDC extra heavy-duty Make and Break auto relay with bracket. 12 Volts 200 Amps switch relay with two 6.3mm blade terminals and two M6 studs.
Excl VAT
 .jpg) .jpg) |
Durite 12VDC 200A smart relay with 9 programmes and override function. 12 Volts 200 Amps smart relay with two 6.3mm blade terminals and two M6 studs.
Excl VAT
 .jpg) |
Durite 12VDC 70A-20A split charge relay that isolates the fridge circuit. 2 x 2.8mm, 1 x 6.3mm and 2 x 9.5mm terminals. Replaces Lucas SRB630.
Excl VAT
 .jpg) .jpg) .jpg) |
Bulkhead mounted socket for flasher units and relays. The socket accepts up to four 2.8mm and five 6.3mm blade terminals.
Excl VAT
 .jpg) .jpg) .jpg) |
Bulkhead mounted socket for controllers, flasher units and relays. The socket accepts up to four 2.8mm, three 6.3mm and two 10.5mm blade terminals.
Excl VAT
 .jpg) .jpg) |
Durite universal flying socket for flasher units and relays. The socket accepts up to five 6.3mm blade terminals.
Excl VAT
 .jpg) .jpg) .jpg) |
Durite bulkhead socket for micro relays. The socket accepts up to two 2.8mm, three 4.8mm and two 6.3mm terminals.
Excl VAT
 .jpg) .jpg) |
Durite's 4-way micro relay holder. The unit will accommodate four standard Make and Break relays or 4 standard changeover relays.
Excl VAT
 .jpg) .jpg) |
Durite 7-way micro (slim) relay holder for panel mounting. The unit will accommodate seven slimline Make and Break or changeover relays.
Excl VAT
 .jpg) .jpg) .jpg) |
Bulkhead socket for heavy-duty relays. The socket accepts up to four 2.8mm, two 6.3mm and three 10.5mm blade terminals.
Excl VAT
 .jpg) .jpg) .jpg) |
0-876-81 Durite cut-off relay module with push button switch. The module silences the alarm for +/- 4 minutes or ACC reset.
Excl VAT