Durite 5.75A Black and Red standard twin-core automotive cables in a round moulded sheath for a vehicle wiring loom. PVC sheathed and copper-cored electrical wire supplied on cardboard cable reels for van or workshop storage racks and dispensers.
- .65mm² (19AWG) Black and Red.
- 5.75 Amps twin-core automotive cables and vehicle wiring.
- 9 copper strands at 0.30mm.
- Outside diameter: 6.5mm.
- Manufactured to BS6862-1:1971.
- Roll length: 30m.
About the 0-951-51 0.65mm² Black and Red PVC Electric Cables
Arc Components Limited presents the 0-951-51, Durite's light-duty 5.75A Black Negative (-) and Red Positive (+) twin-core automotive cables, ideal for your vehicle's connection to electrical equipment with a low load requirement.
This high-quality PVC round sheathed, copper-cored electrical wire is supplied on a 30m cardboard reel, perfect for storage in your van or workshop ready-use wiring racks. It is 0.65mm² (19 AWG) and features two 9 strands of 0.30mm separate copper wires bound together in a PVC sleeve and then moulded into a round PVC sheath, with an outside diameter of 6.5mm. It meets all necessary standards for electrical equipment wiring for domestic and commercial vehicles, including BS6862-1:1971. It has good overall resistance to petrol, diesel and lubricating oils. It is suitable for continuous current loads to a maximum of 5.75 Amps per cable.
The Durite 0-951-51 twin cables are commonly used as conductor wires on low-amperage 12V-24V electrical equipment.
Specifications
Type | Twin-core standard automotive wiring |
Current Rating | 5.75 Amps |
Insulation Colour | Red and Black |
Wire | 9/0.30mm copper |
Cross-section | 0.65mm² (19 AWG) |
Voltage | For 12 and 24 Volts DC systems (100 Volts DC Max.) |
Resistance | 29.4mΩ/m at 20℃ |
Insulation | Hard-grade PVC offers good resistance to abrasion and cut-through. |
Outside Diameter | 6.5mm |
Temperature | Minus 30 to +70℃ |
Length of Cable | 30 Metres |
Approvals | BS 6862-1:1971 |
Weight | 1.88Kg |