Durite 12V-24VDC 100A battery isolator or disconnect switch with a removable red key. The unit has a soft PVC cap for protection when the key is removed.
- It is rated: 100 Amps at 24VDC (500 Amps for 5 seconds and suitable for 12VDC and 24VDC systems).
- The manually operated battery disconnect switch has a removable key and splashproof cover.
- M8 copper studs with nuts, washers and spring washers.
- To fit a 24mm diameter hole.
- Pack Quantity: 1 piece
Associated Parts
- Spare or replacement key: 0-605-99.
Replacement Guide
- Lucas: SSB112 and 21939013.
About The 100 Amps Battery Isolator
The Durite 0-605-00 is an excellent manual battery disconnect switch when used as a vehicle battery isolator for; Off-Road, industrial, agricultural and marine 12V or 24VDC vehicle systems. Capable of handling up to 100 Amps load close to the battery source, the large paddle-style removable key of the switch is visible when located on a vehicle's panel.
The key is removable in the "Off" position for user safety, which is useful when fitting to site work vehicles and used in conjunction with the key switch. You can also use the through-panel battery cut-off switch to avoid draining batteries when equipment is left unused for long periods.
Durite Automotive Battery Isolator Switch comes in a pack of one and is a must-have for any vehicles electrical system. This switch is rated at 100 Amps at 24VDC and can handle 500 Amps for 5 seconds. It has M8 copper studs with nuts, washers and spring washers, allowing it to fit a 24mm diameter hole. The battery isolator switch also features a removable red key and a soft PVC cap for extra protection when the key is removed.