12V and 24V Momentary On, forwards, backwards and Off position double pole switch.
- Momentary On, Off in the central. Momentary On or Momentary Changeover.
- Double pole switch.
- With nickel plated brass lever.
- Six 6.3mm blade terminals.
- Requires 13mm panel hole.
- Rated: 10A at 28Vdc.
Associated Parts
- 0-603-03 spring-loaded red toggle switch safety guard.
- 0-603-99 pack of 10 rubber sealing gaiters for 12.5mm shafted switches.
About The 10A Momentary On Metal Toggle Switch
A double pole metal switch with a plated brass lever, suitable for power load switching up to 10 amps at 28 Vdc (suitable for 12Vdc and 24Vdc circuits). Switching function is a double pole 'momentary on', 'off' and 'momentary on' position, which allows two separate circuits to switch. The switch lever is bias to 'off', each lever direction selected allows a momentary make of the circuit and spring returns to the 'off' position when released.
Specifications
Type | Momentary On-Off-momentary on or momentary change over double pole |
DC voltage rating at 28 volts | 10 amps |
AC voltage rating | 10 amps at 250VAC, 15 amps at 125VAC |
AC inductive contact rating | 4 amps at 250VAC |
Electrical life | 50,000 cycles minimum at maximum rating |
Mechanical life | 100,000 cycles minimum |
Contact material | Fixed: silver on copper. Moving: Silver-alloy on copper. |
Terminals | Brass 6.3mm lucar blade |
Base material | Phenolic |
Actuators and finish | Bright nickel plated brass lever |
Temperature range | Operating: 0 to +85℃. Storage: -40 to +85℃. |
Contact resistance | 10mΩ maximum at 4 Volts DC and 1 amp |
Electric strength | 0.75kVacross contacts and 2kV live to accessible surfaces. |
Insulation resistance | Greater than 50MΩ |
Mounting | Threaded bush, 15/32 Whitworth, secured front and behind the panel by fixing nut and ring. |
Dimensions | Length: 33.4mm, Width: 19.2mm and Height: 63mm (including level and tabs) |
Weight | 45g |