0-129-24 Anti-Theft 24V Solenoid for Petrol and Diesel

 Durite 0-129-24 24VDC electrically operated fuel valve suitable for both petrol and diesel engines to cut-off fuel when not energised.

• Protected lP 65.
• Normally Closed (NC).
• An to ideal immobiliser or anti-theft device.
• It is not designed for use as a stop solenoid.
• Cuts off fuel when not energised.
• Bore size: 6.0mm.
• Pressure: 0-3 bar.
• Flow coefficient of: 0.60.
• 11mm outside diameter port.

Fitting Instructions

 Mount the device between the fuel filter and the engine on the low pressure feed to the engine using the supplied-mounting bracket, care should be taken to note the direction of fuel flow on the valve body. Use the 'Jubilee' type clips to secure the fuel pipes. Discreetly wire from an ignition feed through a 3 Amps maximum fuse via a hidden switch to either terminal '1 or 2' on the solenoid and connect the other terminal to earth. Terminal 3 has no function.

 Switch on and start the engine, check the hose connections for leaks then switch off the electrical supply to the device to confirm that the fuel flow is interrupted.

Specifications