SW82-246 Albright Double-pole Single Coil Solenoid 12V Continuous

 Albright's SW82-246 12 Volts 100A DPST Normally Open switch contactor, continuous.

• The SW82 type of contactors has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks.
• Developed for both interrupted and uninterrupted loads, the SW82 is suitable for switching Resistive, Capacitive and Inductive loads.
• The SW82 features double pole double-breaking main contacts with Silver-alloy tips, which are weld resistant, hardwearing and have excellent conductivity.
• Diode fitted on the coil 6.3mm spade terminals, positive to the top

Associated Products

• 2070-90 Service or repair contact kit
• 2126-48a Mounting bracket.

Dimensions

• Base plate to the top of brass studs (height): 91mm.
• Body length excluding mounting bracket: 73mm.
• Depth: 39mm.
• Main terminal studs: M8.

About Continuous (CO.) SW82-246 Solenoids

 Continuous contactors by design are predominantly for drive functions on vehicles, they switch slower than intermittent solenoids and are recommended for prolonged contact periods.

 The contactors are compact in size and are fully serviceable with a full range of spare parts available. The SW82 has M8 stud main terminals and 6.3mm spade coil connections. It can be mounted via M4 tapped holes or by purchasing mounting brackets. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.

Specifications