SW80B-1726 Albright 72-80V Single-acting Solenoid Contactor - Intermittent

 Albright SW80B-1726 single-acting 72-80Vdc solenoid contactor with L-shaped bracket, intermittent.

• The SW80 series of contactors has been designed for direct current loads, particularly motors as used on small electric vehicles such as light industrial trucks, powered invalid cars, etc. They have double-breaking contacts with Silver-alloy contact tips, which are weld resistant, hardwearing and have excellent conductivity.
• They are economical in price and compare favourably with sealed automotive-style solenoid switches, which cannot be serviced or inspected for contact wear.
• L-shape bracket 2070-40 fitted on the right hand side.

Associated Products

• 2070-57Contacts repair kit
• 2070-124Auxiliary switch kit
• 2070-40L-shape bracket

Dimensions

• Height, including terminals and coil base cap: 94mm.
• Coil width: 41mm.
• Cap width: 50.5mm.
• Cap depth: 39mm.

Magnetic Blowouts

 These contactors are of double break configuration and are fitted with magnetic blowouts (denoted by the 'B' suffix in the SW80 range) across both contact gaps. These enable high currents to be ruptured very quickly so that arcing time is reduced to a minimum. The fitting of blowouts makes the contacts polarity sensitive, and the Positive markings on the top cover of the contactor must be observed.

About Intermittent (Int.) SW80 Solenoids

 Intermittent contactors, by design, are predominantly used for hydraulic functions on vehicles; they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.

 The SW80 has M8 stud main terminals and 6.3mm spade coil connections. Mounting is via M4 tapped holes or by steel mounting brackets (supplied as separate items). Mounting can be horizontal or vertical. When vertical, the M8 contact studs should point upwards.

Specifications