SW800-5 Albright 30V 800A Busbar Contactor - Continuous

 Albright International SW800-3 30 Volts single-pole, single-throw solenoid contactor, continuous.

• The SW800 is designed for use in telecommunication and power distribution applications where an uninterrupted load is switched.
• These contactors are primarily for use with Direct Current loads but can also be used with Alternating Currents.
• The SW800 features double-breaking main contacts with Silver-alloy tips which are weld resistant, hard wearing and have excellent conductivity.
• Silver plating on the main contacts is standard for the SW800.
• Due to their configuration, the SW800 contactors are deemed non-serviceable, therefore contact kits are not available.

Dimensions

• Height including microswitch and coil base cap: 146mm.
• Coil width: 58mm.
• Cap width: 55mm.
• Cap and fixed contact total width: 128mm.

Associated Parts

• 2155-165 Vertical mounting bracket single (2 x recommended)
• 2065-167 Horizontal mounting bracket kit (1 x recommended)

About Continuous (CO.) SW800 Solenoids

 Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.

 This compact contactor can be busbar mounted vertically or horizontally, but if mounted vertically, the coil should be at the bottom.

Specifications