SW688-9 Albright Paired Double-pole Single-throw Solenoid - 24V Continuous

 Albright's SW688-9 strapped pair, 24 Volts 80A continuous, DPST Normally Open switch contactor.

• The SW688 type of contactors has been designed for direct current loads, including motor reversing functions as used on electric vehicles and industrial trucks.
• Developed for both interrupted and uninterrupted loads, the SW688 is suitable for switching Resistive, Capacitive and Inductive loads.
• The strapped pair SW688 features double pole double-breaking main contacts with Silver-alloy tips, which are weld resistant, hardwearing and have excellent conductivity.
• 3060-292 bracket fitted.

Dimensions

• Base plate to top of brass studs (height): 81mm.
• Body length excluding mounting bracket: 73mm.
• Depth: 42mm including bracket.
• Main terminal studs: M6.

About Continuous (CO.) SW688-9 Solenoids

 Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.

 The contactors are compact in size and are fully serviceable with a full range of spare parts available. The SW688 has M6 stud main terminals and 6.3mm spade coil connections. It can be mounted via the supplied mounting bracket. Mounting can be horizontal or vertical, when vertical the M6 contact studs should point upwards.

Specifications