SW61B-6 Albright 36V DC Single-pole Double-throw 80A Solenoid - Continuous

 Albright SW61B-6, 36 Volts DC miniature single-pole, double-throw solenoid contactor with open top cap and magnetic blowouts fitted.

• The SW61B is a miniature series single pole, free standing, compact contactor. It is designed to fill the gap between 30 ampere relays and 100 ampere contactors.
• Devised for both interrupted and uninterrupted loads, the SW61B is suitable for switching Resistive, Capacitive and Inductive loads. Typical applications include switching small traction motors, hydraulic power packs and small electric winch motors.
• All contactor builds are to a very high standard and employ best quality materials: phenolic contact housings, Silver-alloy contacts and class H (180℃) winding wire for the coils.
• Repair kit: not available on this unit.

Dimensions

• Height including terminals and coil base cap: 81.0mm.
• Coil width: 37.0mm.
• Depth including fixed contact bar: 47.0mm.

Magnetic Blowouts

 These open case contactors are of double break configuration and are fitted with magnetic blowouts (denoted by 'B' suffix in the SW61B range) across both contact gaps. These enable high currents to be ruptured very quickly so that arcing time is reduced to a minimum. Fitting of blowouts makes the contacts polarity sensitive and the positive markings on the top cover of the contactor must be observed.

About Continuous (CO.) SW61B Solenoids

 Continuous contactors, by design, are predominantly for drive functions on vehicles; they make and break slower than intermittent solenoids, and are recommended for prolonged contact periods.

 The SW61B features single pole, double-breaking main contacts with Silver-alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The SW61B has M6 stud main terminals and 6.3mm spade coil connections. It can be mounted via M4 tapped holes or mounting brackets, supplied as separate items. Mounting can be on the side or base of the contactor.

Specifications