SW260-101 Albright 24V Single-acting Busbar Solenoid Contactor - Intermittent

 Albright International SW260-101, 24 volts DC single-pole, single-throw (SPST) 'Normally Open' solenoid contactor, intermittent.

• The SW260 is designed for use in telecommunications and power distribution applications where an uninterrupted current load is switched.
• These contactors are primarily for use with Direct Current loads but can also be used with Alternating Current if used in conjunction with an AC rectifier board (sold separately).
• The SW260 features double-breaking main contacts with Silver-alloy tips which are weld resistant, hardwearing and have excellent conductivity.
• Silver plating on the main contacts is standard for the SW260.

Dimensions

• Height including terminals and coil base cap: 96mm.
• Coil width: 45mm.
• Cap width: 57mm.
• Cap and fixed contact width: 128mm.
• Fixed contact depth: 59mm.

About Intermittent (INT.) SW260 Solenoids

 Intermittent coils by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.

 The SW260 is a compact contactor which can be busbar mounted vertically or horizontally, if mounted vertically the coil should be at the bottom.

Specifications