SW205N-71 Albright 2 x SW201 125V DC Contactors on a bracket - Continuous

 Albright SW205N-71 125VDC 250 Amps contactor with coils connected in series, continuous.

• The SW205 has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks.
• Developed for both interrupted and uninterrupted loads, the SW205 is suitable for switching Resistive, Capacitive and Inductive loads.
• The contactors are compact in size and are fully serviceable, with a range of spare parts available.
• No blowout magnets are fitted.
• Coils are connected in series.
• Cranked links, next to bracket.

Associated products

• Repair contact kit: 2155-250 (Two are required for this unit).
• Auxiliary switch kit part number: 2155-202 (1 kit does 1 x coil).

Dimensions

• Height including terminals and coil base cap: 149mm.
• Assembly width including bars and bracket: 160.0mm.
• Total depth including bracket: 83mm.

About The Continuous SW205 Contactors

 Continuous contactors by design are predominantly for drive functions on vehicles; they switch slower than intermittent solenoids and are recommended for prolonged contact periods.

 The SW205 features 2 x single pole double throw, double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity. The SW205 has M10 stud main terminals and 6.3mm spade coil connections.

Magnetic Blowouts

 These contactors are fitted with magnetic blowouts across contact gaps as standard. These enable high currents to be ruptured very quickly so that arcing time is reduced to a minimum. Fitting of blowouts can make the contacts polarity sensitive and the positive markings on the top cover of the contactor must be observed.

Specifications