SW1500-9 Albright 48V Single-acting Busbar Solenoid Contactor - Continuous

 Albright International SW1500-9 48 Volts DC single-pole, single-throw (SPST) 'Normally Open' solenoid contactor, continuous.

• The SW1500 is designed for use in telecommunications and power distribution applications where an uninterrupted current load is switched.
• These contactors are primarily for use with Direct Current loads but can also be used with Alternating Current if used in conjunction with an AC rectifier board (sold separately).
• The SW1500 features double-breaking main contacts with Silver-alloy tips, which are weld resistant, hardwearing and have excellent conductivity.
• Silver plating on the main contacts is standard for the SW1500.

Dimensions

• Height, including terminals and coil base cap: 148mm.
• Coil width:75mm.
• Cap width:103mm.
• Cap and fixed contact width: 188mm.
• Fixed contact depth: 102mm.

About Continuous (CO.) SW1500 Solenoids

 Continuous contactors, by design, are predominantly used for drive functions on vehicles; they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.

 The SW1500 is a compact contactor which can be busbar mounted vertically or horizontally. If mounted vertically, the coil should be at the bottom.

Specifications