PC60-2 Albright 12V DC PCB Mount SPST Solenoid - Continuous 80A

 Albright PC60-2, 12 Volts DC single-pole, single-throw (SPST) miniature single-acting solenoid contactor, continuous. The unit has an M4 mounting bolt and is designed for printed circuit board mounting.

• The PC60 is a miniature series single-pole, single-throw contactor designed for printed circuit board mounting.
• Devised for interrupted and uninterrupted loads, the PC60 is suitable for switching Resistive, Capacitive and Inductive loads.
• Typical applications include Telecommunication, UPS and other power conversion systems.
• All the contactors are manufactured to a very high standard and employ the best quality materials: phenolic contact housings, Silver-alloy contacts and class H (180℃) winding wire for the coils.
• Repair kit: not available on this unit.
• The centre mounting screw is M4 x 8mm long.

Dimensions

• Length: 84mm.
• Width: 36mm.
• Height (including terminals and mounting stud): 36mm.

About Continuous (CO.) PC60 Contactors

 Continuous contactors, by design, are predominantly used for drive functions on vehicles; they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.

 The PC60 features single pole double-breaking main contacts with Silver-alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The PC60 can be secured to the printed circuit board by means of an M4 bolt.

Installation

• To accommodate the PC Contactors, printed circuit boards should be drilled in accordance with the mounting details in the attached image (mounting details).
• Prior to soldering, the PC60 can be secured to the circuit board by means of an M4 bolt that protrudes from the underside of the contactor.
• If the full current ratings of the contactors are to be utilised, circuit board tracks should have the appropriate thickness and width of copper.
• Conventional hand or wave soldering techniques can be used.

Specifications