Crimping Tools

Durite 0-702-00 crimping tool for the three sizes of pre-insulated terminals and ignition terminals.

Durite 0-703-00 crimping tool for three sizes of uninsulated terminals and ignition terminals

Durite 0-702-10 crimping tool for pre-insulated, uninsulated and ignition terminals. The tool will cut and strip six sizes of auto cable.

Durite 0-703-20 Deutsch crimp tool for closed barrel D-Sub contacts. AWG12-20 (0.5-4.0mm²). Carbon steel with Black oxide finish.

Durite 0-702-50 ratchet crimping tool for pre-insulated automotive Red, Blue and Yellow terminals.

Durite 0-703-54 ratchet crimping tool for heat shrink pre-insulated automotive Red, Blue and Yellow terminals.

Durite 0-703-50 ratchet crimping tool for medium to large uninsulated terminals.

Durite 0-703-30 47 piece ratchet crimping tool kit suitable for 1.5 Superseal terminals, Junior power timer and Deutsch contacts.

Durite 0-703-40 47 piece ratchet crimping tool kit suitable for 1.5 Superseal terminals, Junior power timer and Deutsch contacts.

Durite 0-703-51 ratchet crimp tool for Econoseal and Superseal terminals. For auto cable and wire 0.5mm² to 2.0mm².

Durite 0-703-52 ratchet crimping tool for Junior Power Timer terminals, for wire 0.5 to 2.0mm². Crimp must complete before the ratchet is released.

Durite 0-703-53 ratchet crimping tool for Junior Timer terminals. For auto wire 0.5 to 2.0mm². Crimp must complete before ratchet is released.

Durite 0-703-60 ratchet crimper tool. Used for crimping 4 sizes of medium to heavy-duty copper tube crimp terminals.

Durite 0-703-85 Heavy-duty crimping tool for uninsulated tube terminals. Length 660mm. Hexagonal crimps for 10mm² to 95mm² cable conductors.

Durite 0-703-85 Heavy-duty crimping tool for cables 10mm² to 120mm². Length: 550mm. This crimp tool has been an industry-standard tool for a long time.

Durite 0-703-90 heavy-duty tinned terminal crimping tool. For copper tube ring terminals up to CSA 95mm². Vice mount tool or strike with a hammer.

Durite's 0-004-00 snip and snap closing tool for inserting solder or crimp nipples into connectors.

Durite 0-004-50 cable connector crimping tool, designed to crimp automotive brass nipples.

Durite 0-703-99 automotive terminal connector de-mounting tools. Pack of 2 handy tools for disassembling many terminal connectors.

Durite 0-704-00 Electrical Engineer Two-in-One tool from the Durite range of tools. It is a cable cutter and crimper in one space-saving unit.

Durite 0-704-20 Side Cutters for soft copper cable only. Spring loaded handles with soft touch insulated grips. 13mm jaw opening.

Durite's 0-704-21 heavy-duty wire side cutters for automotive cables. Wire side cutters for cables up to 16mm². For soft copper cable.