All Products

Telemecanique emergency stop button and housing. Single-pole Normally Closed (NC) contact. Reference XAL-K174 and XALK174.

Two button Normally Open (NO) switch panel. Two single-pole switches an a box panel. Reference XAL-D222 and XALD222.

Three-button Normally Open (NO) and Normally Closed (NC) switch panel. 3 single-pole switches on a box panel. Reference XAL-D324 and XALD324.

Telemecanique single button box panel housing fitted with contact block mounting plate. Reference XAL-D01 and XALD01.

Telemecanique two buttons box panel housing fitted with contact block mounting plate. Reference XAL-D02 and XALD02.

Telemecanique three buttons switch box panel housing fitted with contact block mounting plate. Reference XAL-D03 and XALD03.

Telemecanique NO switch block. Single-pole Normally Open (NO) switch rated 0.04A at 24VDC. Reference ZEN-L1111 and ZENL1111.

Telemecanique NC Switch block. Single-pole Normally Closed (NC) switch rated 0.04A at 24VDC. Reference ZEN-L1121 and ZENL1121.

Telemecanique NO Switch block. Single-pole Normally Open (NO) pendant switch rated 0.04A at 24VDC. Reference ZB2-BE101 and ZB2BE101.

Telemecanique Red flush stop push button. Push button actuator with a spring return. Reference ZB5-AA432 and ZB5AA432.

Telemecanique White flush direction push button. Push button actuator with a spring return. Reference ZB5-AA334 and ZB5AA334.

Telemecanique Black flush direction push button. Push button actuator with a spring return. Reference ZB5-AA335 and ZB5AA335.

Telemecanique push button security isolator. Twist to release the security isolator button actuator with a mushroom head. Reference ZB5-AS54

Telemecanique push for off security isolator key switch actuator with key release only. Reference ZB5-AS74 and ZB5AS74.

Telemecanique On-Off security isolator. Key switch actuator that can be locked on or off. Reference ZB5-AG4 and ZB5AG4.

Telemecanique changeover rotary switch button. Two positions On-Off change over switch actuator. Reference ZB5-AD2.

Telemecanique clear boot cover to use with flush buttons, which raises the IP protection to IP66. Reference ZBP-0 and ZBP0.

Telemecanique plastic box spanner for tightening push buttons and key switch nuts. Reference ZB5-AZ905 and ZB5AZ905.

Changeover On-Off 2 position single-pole switch with nylon paddle style lever. It requires 13mm panel hole and is rated 10 Amps at 12VDC.

Changeover or On-Off 2 position, single-pole toggle switch with a nickel-plated brass lever. It requires a 13mm panel hole and is rated 10A at 28VDC.

Changeover or On-Off double-pole toggle switch with a nickel-plated brass lever. It requires a 13mm panel hole and is rated 10 Amps at 28VDC.

On-On or changeover single-pole toggle switch. It requires a 14.5mm panel hole and is rated 18 Amps at 12VDC. Replaces 34889.

Durite automotive foot-operated changeover and dip switch. Under the floor or footwell mounted dip switch with screw terminals.

Changeover or On-Off, 2 positions, single-pole switch with rubber sealing gaiter. It requires a 13mm panel hole and is rated 10A at 28VDC.

Durite 300mm 415A starter to switch lead with a 10mm ring to a 10mm ring terminal. 60mm² sheathed cable 61/1.13mm.

Durite 450mm 415A starter to switch lead with a 10mm ring to a 10mm ring terminal. 60mm² sheathed cable 61/1.13mm.

250ml bottle of Baker's No. 3 soldering fluid. The bottle weight is approximately 250ml. Baker's number three soldering fluid.

Moulded round Red reflex reflector on a Black plastic base with three hole fixing, 105mm diameter, pack of 10, ECE approved.

Red round reflex reflector with 2 hole fixing, designed to match 95mm diameter lamps. ECE approved.

Moulded clear reflex reflectors with self-adhesive backing, diameter: 55mm, ECE approved.