All Products

24V 420Hz high tone disc horn, 2 pole, 112dB(A), diaphragm type with passivated and painted steel body.

24V 335Hz low tone disc horn, 2 pole, 112dB(A), diaphragm type with passivated and painted steel body.

24V 440-390Hz Electro-magnetic twin trumpet electric horn, 115dB(A), pre-wired and supplied with relay, ECE approved.

2 pole contact-less electronic horn, 24-48V 410Hz high tone, 108dB(A) diaphragm type with passivated steel body.

12V 500Hz high tone trumpet electric horn, 2 pole, 109dB(A), with moulded Black body, 83mm diameter

12V 420Hz low tone trumpet electric horn, 2 pole, 109dB(A), with moulded Black body, 80mm diameter.

24V 500Hz high tone trumpet electric horn, 2 pole, 109dB(A), with moulded Black body and Red plastic cover, 83mm diameter.

24V 420Hz low tone trumpet electric horn, 2 pole, 109dB(A), with moulded Black body and Red plastic cover, 83mm diameter.

48V 420Hz high tone disc horn, 2 pole, 112dB(A), diaphragm type with passivated and painted steel body.

Twin commercial air horn, chromium plated brass trumpets, supplied with hand valve, dust covers and fixings, length: 440mm.

Trumpet dust cover for part numbers: 0-642-65 and 0-642-60 only.

12V 390Hz high tone electromagnetic marine trumpet electric horn, 430mm long, 112dB(A), pre-wired for isolated return, ECE approved.

12V 340Hz low tone electro-magnetic marine trumpet electric horn, 500mm long, 112dB(A), pre-wired for isolated return, ECE approved.

Twin commercial air horn, chromium plated brass trumpets, supplied with hand valve and fixings, length: 630mm.

Single commercial air horn, chromium plated brass trumpet, supplied with hand valve and fixings, length: 700mm.

12V electric solenoid valve for use with commercial air horns, suitable for pressures from 2-10bar, uses 6mm tubing.

Single commercial air horn, chromium plated brass trumpet, supplied with hand valve and fixings, length: 770mm.

24V 390Hz high tone electro-magnetic marine trumpet electric horn, 430mm long, 112dB(A), chromium plated brass trumpet, ECE approved.

24V 340Hz low tone electro-magnetic marine trumpet electric horn, 500mm long, 112dB(A), chromium plated brass trumpet, ECE approved.

Commercial deep low tone air horn, with moulded Black body and trumpet, supplied with 24V electric solenoid valve and fixing.

24V electric solenoid valve for use with commercial air horns from Arc Components Limited, suitable for pressures from 2-10bar, uses 6mm tubing.

12V-24VDC Off-A-A+B, three position side and headlamp toggle switch. It requires a 13mm panel hole and is rated 10 Amps at 28VDC.

Durite On-On-On single-pole, plastic paddle toggle switch. It requires a 14.5mm hole and is rated 10 Amps at 12VDC. Replaces 35927 and 31788.

Off/On A/On A+B, single-pole side and push-pull headlight switch. With screw terminals and rated 10A at 12VDC. Replaces Lucas SPB364.

12VDC light switch or Off-On-On-On four positions (Off-Side-Dip-Beam) rotary switch with screw terminals. Requires a 27mm hole. Rated 11A at 12VDC.

Durite 12V-24VDC headlamp rotary switch with horn push. Rotary switch for dashboards, control panels and cowlings. Requires a 14mm panel hole.

Durite interference capacitor with cable. Black 2.2F capacitor, rated at 110VDC. Sold in single packs.

Durite 12 Volts DC 10A windscreen wiper switch. Three positions On-On-On and rated 10 Amps at 12VDC.

12V automatic automotive battery charger 2.7A, for all 12 Volts lead-acid batteries including: sealed for life, gel and maintenance free.

24V automatic automotive battery charger 1.5A, for all 24 Volts lead-acid batteries including: sealed for life, gel and maintenance free.