DC Input Voltage
13VDC (11VDC-15VDC)
AC Output Voltage
230VAC +/- 10%
Output Frequency
50Hz +/-1Hz
Output Wave
Pure Sine Wave
Efficiency
85 Percent Maximum.
24V input no load current draw
≦ 1.0A
USB Output (2 USB total)
DC 5V, Maximum 2100mA, 2.1A
Continuous Output Power
1000 watts
Surge/Peak Output Power
2000 watts
Output Sockets
2 x standard 3-pin BS1363 UK socket outlets
Protection
Overload, over-temperature, low battery and short circuit.
Input Low-voltage Alarm
DC 10.5V +/- to 0.3V
Input Low-voltage Shut Down
DC 9.5V +/- to 0.3V
Low-voltage Recovery Voltage
When the input voltage rises to 11.8V +/- 0.3V, the inverter will automatically resume operation
Input Over-voltage Shut Down
DC 15.5V +/- to 0.3V
Over-voltage Recovery Voltage
When the input voltage drops to 15.5V +/- 0.3V, the inverter will automatically resume operation.
Over-temperature protection
When the temperature inside the inverter decreases to the set point, the inverter will back to work automatically
Over-load Protection
Yes (1100 to 1350W).
Overload Recovery
Reduce the load in the rated power range. Restart inverter recovery work. Or wait 1-3 minutes for the inverter to recover automatically.
Over Temperature Protection
Yes
Over Temperature Recovery
When the temperature inside the inverter decreases to the set point, the inverter will back to work automatically.
Output Short Circuit Protection
Yes
Short Circuit Recovery
After troubleshooting, restart the inverter by manual to resume work
Reverse Protection
A reverse connection will blow the fuse, and a fuse replacement with the same specifications can fix the inverter; Reverse connection will cause irreparable damage to the inverter!.
The Best Working Temperature
5 - 35℃
LCD Display Information
Input Voltage, Load Power, Output Frequency, Output Current, Battery Power and Fault Code;
F01 : Low volt
F02 : Overvolt
F03 : Overload
F04 : Over temperature
F05 : Output short circuit
Remote Control
RJ12 port, 6m cable.
Dimensions
Length 325.8mm, Width 210mm and Height 92.7mm
Certification
E-marked, EMC and R10 approved.
.jpg)
