0-740-22 Durite 12V Pre-programmed Pulse Input Timer Relay 0.8 Second Delay

 Durite 12VDC 0.8 seconds programmed pulse input timer relays.

• Individually programmed 'PIC' controlled timers.
• Pulsed input function to give a time response before circuit switching.
• Pulse input triggers timed output.
• Important: Please allow for an extra day on delivery due to programming requirements.

Specification

• Delay: 0.8 seconds on pulse input function.
• Voltage: 12 Volts application with a 9V to 16VDC operation range.
• Current: 20A-25A.
• Temperature: minus 40 to 80℃.
• It is supplied with a metal mounting bracket.
• Protection: IP54.

Dimensions

• Width: 30mm.
• Depth: 30mm.
• Height: 40mm.

Additional Information

• The input trigger in the diagram is via pin 15.
• 'In' is not used in this programmed version.

Associated Products

• 0-729-00 relay mounting socket.

Important LDSR Information

 These relays are held by Durite as a core (not programmed) unit and configured/time-tested on receipt of an official order. Each and every unit requires pre-programming and bench testing 'To Order' to ensure the timer function is calibrated correctly and that every unit works prior to dispatching. This means that the 'Programmed to Order' relays are not refundable if an order for the wrong specification is made by mistake. This measure is in line with Long Distance Selling Regulations (LDSR), and if you are not reordering and are unsure of the relay's function, please get in touch with us or Durite's technical helpline to discuss your requirements.