0-674-00 Durite 12V Portable Twin Piston Air Compressor

 Durite 12VDC portable twin piston air compressor with nozzle adaptors and carry case.

• 150PSI maximum inflation.
• 13.8V maximum voltage.
• 23A maximum current.
• 5M coil air hose with a pressure gauge.
• 3M Flying lead with crocodile clips.
• 65 L/pm output - inflates a normal car tyre in under 3 minutes.
• Maximum duty cycle 40 minutes with thermal cut-out protection.
• Accessories include 2 nozzle adaptors, 1 sports needle and a robust carry case.

Dimensions

• Length: 24.5cm
• Width: 9.5cm
• Height: 20cm

Inflating Vehicle Tyres

1. Start the vehicle engine to achieve optimum compressor performance.
2. Connect the croc clips to the relevant battery terminal.
3. Turn the compressor ON to begin inflating the tyre.
4. When the pressure gauge reaches the desired pressure (as per your vehicle specification found in your manual), switch the unit OFF and remove the air hose from the valve.

Precautions

1. Allow sufficient cooling time before storing the unit.
2. All parts are lubricated for the life of the unit. No oiling is required. Please do not open the unit or tamper with it as this will void the warranty.
3. To avoid draining the vehicle battery, if possible please have the engine running while using the air compressor.
4. Please ensure that the power switch is in the OFF position if the unit is not in use.

Other Inflatable Objects

1. Start your vehicle's engine, then connect the compressor flying leads to the battery.
2. Nozzles are provided to fit most inflatable objects. Simply screw the appropriate nozzle into the brass tip of the air hose.
3. Attach the appropriate nozzle to the inflatable object and turn the compressor on. When the object is inflated to desired firmness or pressure, turn the compressor off.

Specifications