Telemecanique Pistol grip lifting switch for hand-operated direction switching in an engineer's workshop or mechanic's garage application.
- A push button pendant switch panel with Normally Open (NO) direction switches.
- Two single-pole push switches on a hanging panel. The pendant is a pistol grip controller with mechanically interlocked switches.
- Telemecanique reference XAC-A201 and XACA201.
- Pistol grip with mechanically interlocked switches.
- Protected to IP65.
About the Durite 0-657-00 Pendant Control Switch
The 0-657-00 Two Button Pendant Polypropylene Pistol Grip Switch from Durite is the perfect choice for single-speed hoisting applications. This ergonomic pistol grip switch is designed to provide single-handed direct control, even with heavy work gloves. It is impact, dust, water, and vibration resistant, with an IP65 rating to ensure it can withstand harsh environments. The solid rubber grommet for the junction and cables provides maximum water tightness. This Telemecanique switch has two buttons, allowing you to easily open and close a circuit panel with a single-pole Normally Open (NO) switch action. Invest in the 0-657-00 Two Button Pendant Polypropylene Pistol Grip Switch and configure, repair or refurbish your workshop hoist or crane.
Specifications
| Type | Pendant control station |
| [Ithe] Enclosed Thermal Current | 10A |
| [Ui] Rated Insulation Voltage | 600V to IEC60947-1 |
| Current | 3 Amps at 240 Volts AC
1.2 Amps at 600 Volts AC
0.27 Amps at 240 Volts DC
0.1 Amps at 600 Volts DC |
| Composition | 2 Push Buttons |
| Control Button Type | First Push Button 1 NO raise, slow.
Second Push Button 1 NO lower, slow |
| Standards | EN/IEC 60947-5-1
CCSA C22.2 No 14
EN/IEC60204-32
UL508 |
| Protection | IP65 |
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
