| 
Need help? Email us: sales1@arc-components.com
. 

0-578-12 24V to 12V Durite Voltage Converter 12A

0-578-12 24V to 12V Durite Voltage Converter 12A
0-578-12 24V to 12V Durite Voltage Converter 12A
0-578-12 24V to 12V Durite Voltage Converter 12A
£98.37 Excl. VAT
RRP £109.30 Excl. VAT
(£118.04 Inc. VAT)
Initial Savings
£10.93
Earn 98 Loyalty Points
   
Available
Model
0-578-12
Bar Code
5056119117653
Part Number
0-578-12
Brand
Durite
Colour
Red
Amperage
12A
Material
Aluminium/Copper/Brass/Plastic
Input Voltage
24V DC
Output Voltage
12V DC
 Intrastat HS Code  8504409090
Ship Weight
445 g
 

 Durite 0-578-12, 24 to 12 Volts DC voltage converter.

  • Voltage: 24VDC to 12VDC, 12A.
  • 12A continuous use.
  • 18A intermittent load.
  • Switch mode non-isolated return.
  • For multiple applications or some high powered audio systems.
  • Installed with a single clip-on bracket.
  • CE marked 93-68-EEC EMC directive 89-336-EEC, automotive 95-94-EC, VIDG5.

Dimensions

  • Length: 126mm.
  • Width: 87mm.
  • Height: 50mm.

Specifications

Type
Voltage Converter
Converter Type
Switched mode, non-isolated return
DC Input Voltage
Nominal 24 Volts (20-32 Volts)
DC Output Voltage
Nominal 12 Volts DC 13.6 Volts DC +15%, Minus 20% regulated
Load Continuous
12A
Load Intermittent
18A
No load (Quiescent)
Current mA
15mA
Approvals To
CE, e11, e13, 2006/96/EC, 2004/108/EC 93/68/EEC, VIDG5 AES
Protection
Overcurrent, overheat, overvoltage, transients and reverse connection
Mounting
With a clip-on bracket (Supplied)
Converter Connection
6.3mm Male spade/blade
Length
128mm
Width
87mm
Height
50mm
Net Weight
410g

 

Installation Instructions (for translation)

 1. Mount this voltage converter in a cool dry position, with good ventilation and with the terminals facing down.

 2. To fit, remove the installation bracket from the voltage converter, mark and drill the three 3.5mm mounting holes in the desired position. Secure with the three screws and caps provided.

 3. Using the 6.3mm insulated terminals provided, run two wires (of a cross section suitable for the maximum load) direct from the battery +ve terminal to the '+24v' INPUT and battery -ve terminal to the '-ve' INPUT terminals. This will prevent any unexpected transient voltages due to high current flow affecting the unit. Always connect the -ve or earth leads first (as with any voltage converter) to allow the voltage regulator to have a reference.

 4. Run two wires (of a cross section suitable for the maximum load) direct to the load from the '13.6v' OUTPUT and the '-ve' OUTPUT terminals. The quiescent current of this unit is less than 15mA and does not cause excessive battery drain, eliminating the need for the unit to be switched off when not in use.

 5. Mount the unit in the bracket. Connect the output and input terminals and check the green LED adjacent to the '13.6v' OUTPUT is lit indicating correct operation. Caution! If the unit is overloaded or overheated for more than a short period it will shut down. When the overload condition is removed and the unit has cooled down, it will reset and continue operation, The unit is fused internally and in the unlikely event of an internal component failing, it cannot be repaired.


Delivery
 
UK Mainland Postage

Delivery Options Our Free UK Mainland Postage and Packaging Service offers unbeatable value for money. The free UK Standard shipping is automatically applied to your shopping cart page with no additional cost when you reach the £50.00 minimum order value.

 We use Royal Mail Standard or Recorded Delivery for light, low-value orders and we use FedEx, UPS, Parcel Force, and other major courier services for larger and more valuable consignments.

 
International Consignments

 Our international customers will need to provide the exact Card Holder Address (Invoicee) as the first address for payment processing. Please note that PO Box addresses are not acceptable as delivery addresses by some couriers. All export orders must be placed and paid for online. Proforma Bank Transfer IBAN and SWIFT payment methods are available to create online.

Also Bought

Durite Splashproof Inline MINI Blade Fuse Holders | Re: 0-372-90

Durite Splashproof inline MINI blade fuse holder with flying leads. Weather protected single fuse carrier with a maximum fuse rating of 15A continuous.

Re: 5-372-90 
£4.64
Excl VAT
Available

Customer Feedback (0)
Leave a Review