Durite 0-014-01 Black high-current 30A connectors for automotive cables and vehicle wiring. The units mate with the same part number and can slide together with Red 0-014-05 units.
- Black Anderson type high current 30A connector.
- Polycarbonate with silver-plated solid copper terminals.
- They can be ganged together.
- Quantity: 10.
Dimensions
- Length: 24.6mm.
- Width: 7.9mm.
- Height: 7.9mm.
Additional Information
- The connectors are ‘genderless’ and are connected by inverting one connector.
- There are no colour keys, and hence connected colours can be mixed.
- The contacts are self-wiping.
About The Black 30 Amps Battery Connector
Used as a light to medium load battery cable connector, the Durite 30A Black connector, when reversed, clips into another connector of the same size to create a secure connect and disconnect plug for chargers. They will stand up to rigorous use due to the sturdy terminal and housing construction.
Typically used as a battery charger connect-disconnect plug on DC electric-powered equipment.
A common question regarding this connector is: does the unit require a different partner connector? The answer is no; you would use another connector of the same part number and rotate 180° (upside down) to create the connection. Two units for a simple battery cable split connector or three if a connection to a charger is required.
Specifications
DC Rating At 600VDC
30 Amps
Housing Material
Polycarbonate
Contact Material
Silver-plated Copper
Typical Wire/Cable Size
AWG 14 (2.00mm²)
Operating Temperature
-20°C to +105°C
Insulation test voltage
2200V AC/DC
Contact Retention Force
25lbs
Connect/Disconnect Force
3lbs
Life Cycles (No Load)
10,000
UL Recognised
File No. E81817
CSA Certified
File No. LR82704
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
